|
Post by Paul Hogan on Mar 16, 2007 7:38:16 GMT -5
Before you click submit on a Blogthing you will notice 6 options at the bottom of the screen above the Submit Button shown bellow Before clicking on the Submit Button, put a black dot next to BBCode like this bellow After you click on the Submit Button, you will see your answer as it should appear in the ProBoard forum, under this you will see a small window with the BBCode ready to cut/copy then paste looking something like this bellow. The next step is to use your mouse pointer to highlight this code, clicking on the code window and using Ctrl-A does the same thing as show bellow. You can now press Ctrl-X for Cut, Ctrl-C for Copy or Right Click with your mouse then select Cut or Copy on the code as shown bellow. Once you have used either Cut or Copy you go back to your forum and press Reply just as you would with any other message, when the reply window comes up you can press Ctrl-V for paste or once again use the mouse to Right Click and select paste see bellow Once you have paster the BBCode into your forum you then click on Post Message just as you would with a normal post, The code for the Image and Bold text are already included. Now have fun with Blogthings NOTE! : if you are the person to start a new thread with an un-posted Blogthing, don't forget to add a tittle in the Subject bar. P.S Click on this link for new Blogthings www.blogthings.com/
|
|
|
Post by Paul Hogan on Mar 16, 2007 7:48:10 GMT -5
I have included some Blogthings to get everyone started, don't take them to seriously as they are all in fun
|
|